About the solution of no image during the use of vision measurement software

1. Confirm whether the CCD is powered on

Operation method: judge whether it is powered on by the CCD indicator light, and you can also use a multimeter to measure whether there is a DC12V voltage input.

2. Check whether the video cable is inserted into the wrong input port.

3. Check whether the video card driver is installed correctly.

Operation method:

3.1. Right-click “My Computer”–”Properties”–”Device Manager”–”Sound, Video Game Controller”, check whether the driver corresponding to the video card is installed;

3.2. When installing the SV-2000E image card driver, you must select the driver that matches the computer operating system (32-bit/64-bit) and the CCD signal output port (S port or BNC port).

4. Modify the port mode of the config file in the measurement software:

Operation method: right-click the software icon, find the config folder in the “measurement software installation directory”, and double-click to open the sysparam file. When you use SDk2000 video card, config is set to 0=PIC, 1=USB, Type=0, when you use SV2000E video card Type=10.

5. Image settings in the measurement software

Operation method: right-click in the image area of the software, select the camera mode in the “image source setting”, and choose different modes according to different cameras (N is a imported CCD, P is a Chinese CCD).