PPG-20153ELS-800G Semi-Electric Ppg Thickness Gauge

Product Detail

Product Video

Parameters & Features

S/N	Item	Configration
1	Effective test area	L200mm × W150mm
2	Thickness range	0-30mm
3	Working distance	≥50mm
4	Reading resolution	0.0005mm
5	Flatness of marble	0.003mm
6	Measurement error of one position	Put a 5mm standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.003mm.
7	Comprehensive measurement error	A 5mm standard gauge block is placed between the upper and lower pressure plates, and the 9 points evenly distributed in the pressure plate are measured. The fluctuation range of the measured value of each test point minus the standard value is less than or equal to 0.01mm.
8	Test pressure range	500-2000g
9	Pressure method	Use weights to pressurize
10	Work beat	9 seconds
11	GR&R	<10%
12	Transfer method	Linear guide, screw, stepper motor
13	Power	12V/24v
14	Operating environment	Temperature：23℃±2℃ Humidity：30～80%
14	Operating environment	Vibration：＜0.002mm/s，＜15Hz
15	Weigh	45kg
16	***Other specifications of the machine can be customized.

Product Description

for the requirements of customers in the new energy industry to rapidly detect battery thickness under specific pressure. It overcomes the problems of unstable pressure, poor adjustment of the parallelism of the splint, and low measurement accuracy when measuring the thickness of lithium batteries on the market. This series of instruments has fast measurement speed, stable pressure and adjustable pressure value, which greatly improves the measurement accuracy, stability and measurement efficiency.

Introduction

The PPG is suitable for measuring the thickness of lithium batteries, as well as measuring other non-battery thin products. It uses stepper motors and sensors to drive, which makes the measurement more accurate.

Operating steps

2.1 Turn on the computer; 2.2 Power on the instrument; 2.3 Open the software; 2.4 Initialize the instrument and return to the origin; 2.5 Put the standard gauge block into the equipment for calibration 2.6 Start measuring.

The main accessories

3.1.Sensor: Open grating encoder. 3.2.Coating: Stoving varnish. 3.3.Material of parts: steel, grade 00 jinan blue marble. 3.4.Cover material: Steel and aluminum.